DigiPlus

Engine oil is DigiPlustoo much (what to do if the engine oil is excess?) In car maintenance, engine oil is a very important maintenance item. Oil not only lubricates the engine, but also plays the role of cleaning, cooling and sealing. Therefore, every car owner should master the correct use of engine oil, especially the problem of oil filling. What if there is too much engine oil? Don't ignore it, otherwise it will directly endanger the safety of the car engine. So, if you find that there is a little too much oil added to the refueling port, what should we do? The basic steps are very simple, but the key is to pay attention to safety issues. Let's take a closer look at it. I. How to find excess oil?First of all, some vehicles have an oil scale on the hood, which can directly see the amount of oil in the engine. If it exceeds the highest scale, it can be judged that the engine oil is exceeded, and the excess engine oil needs to be discharged. If your vehicle does not have an oil meter, you can take a look at the edge of the refueling port. If the oil is exposed to the refueling port, it means that the oil exceeds the standard. II. What should I do if I add too much oil? A small amount of excess oil will not have much impact on the engine, but if it is too much, it is easy to cause damage to the engine. Therefore, it is necessary to judge how to deal with it according to the specific model and the amount of excess oil added. It is also important that before draining excess oil, you must follow the steps below to ensure safety and avoid further harm to the engine. 1. Drive the vehicle to the flat ground first, turn off the engine, and wait for at least 15 minutes to let the oil fully cool and precipitate.2. Open the oil scale or refueling port and discharge the oil into the waste oil barrel to ensure that the oil is below the correct oil level mark. 3. Check the amount of engine oil to make sure that it is within the standard range. If there is excess oil, it can be stored in a sealed container for the next maintenance. 4. Check other parts of the engine to ensure that the oil does not flow to the motor, cable, coil and other parts that are prone to fire. 5. If it is recommended to change the oil, you can take the opportunity to change the oil and re-add an appropriate amount of oil. 6. Restart the engine, wait for a period of time, and check the oil and other important facilities. III. Why can't the engine oil be overdosed? The oil in the engine is the lubricant of the engine. For the engine, the lack of oil will lead to high temperature, high pressure, metal friction, etc. Too much engine oil will lead to excessive hydraulic pressure and easy to produce problems such as engine coolant foaming and disappearing.Excessive engine oil will pump air, affecting lubrication and noise, and will also increase the impact on cruise fuel economy. IV. Conclusion: In the usual maintenance, please pay attention to add an appropriate amount of engine oil. If you find too much engine oil, don't underestimate this problem. You must take timely measures to solve it. In particular, you need to pay attention to safety to ensure that the oil will not flow to the body and electrical components, so as to avoid serious accidents such as fires. Careful car owners can better protect their cars and make them healthier, safer and more effective to serve our lives.

Contact Us
Phone：020-83484608