Bingo Plus

List of contents of this article:

• 1,Bingo Plus How to enter the PE system?
• 2, How to select to enter PE when starting the computer
• 3, How to enter the pe system?

How to enter the PE system?

1. Generally, press F8 to enter the PE system. The steps are as follows: First, press the delete or F2 key, enter bios, and select the boot order: optical drive boot, hard disk boot, USB flash drive boot. Here it is set to CD-ROM boot or USB flash drive startup. The boot disc or the boot USB flash drive must contain PE software, and the boot menu will appear after booting.

2. When we have finished the USB disk bootable system, we can try to let the computer enter the USB disk PE system. If you want the computer to boot from the USB flash drive, you need to choose to start from the USB flash drive when starting up. Generally, PC computers will display the shortcut key to guide when it is turned on.

3. First, insert the cloud knight boot USB flash drive into the USB interface, and then press the power button. Then when the boot screen appears, press the shortcut key of the motherboard to enter the boot selection window. Then select the USB flash drive to start, and press the Enter key to execute. Finally, after selecting Windows8PE, you can enter the PE system.

How to enter PE when starting the computer

1. How to enter pe on ASUS computer: Press the F2 key for a long time to enter the BIOS interface when starting up, and enter [Secure] through the direction key ] Menu, select the [Secure BootControl] option through the arrow keys and set it to Disabled.

2. If the computer cannot be started in safe mode and the latest correctly configured startup, then use the PE boot disk to start the computer. If it still cannot be started, it is a hardware problem and needs to be repaired at the repair shop.

3. Turn on the Dell computer and immediately press the F12 key or esc above the keyboard to enter the shortcut boot menu. Select "Secure Boot" in the list on the left, select "Secure Boot Enabled" after expanding, and then change the option on the right to "Disabled". After the change is completed, click "Apply" below to save.

4. Press the shortcut key to enter the motherboard Bios when starting up, usually Del, and there are also Esc or other keys. Different manufacturers' motherboards have different regulations.Set the USB flash drive (HDD) as the first boot item. After saving, plug in the boot USB flash drive and boot into the PE system.

5. First, press the F2 key to enter the BIOS interface. Note: After the UEFI BIOS model enters the BIOS home page, press the F7 key to enter the Advanced settings page.

How to enter the pe system?

1. First of all, turn on the computer and keep pressing the F12 on the keyboard (the keys may be different depending on the computer brand and model, which may be F10, F2, Esc keys), which will enter the following interface. Move the cursor to the USB Storage Device by pressing the up and down keys in the keyboard. And knock on the car, and the system will boot from the USB flash drive.

2. The specific operation steps of win10 booting into the pe system are as follows: First, we turn on the computer. When starting up, we can try to press the FF1Del key to try to enter the BIOS setting interface.

3. Make the USB disk into a boot disk x0dx0a, press Delete or F2 to enter the BIOS, and set the CD-ROM as the first boot item. X0dx0a Start the computer with the Zhongguancun system CD-ROM and enter the Zhongguancun WINPE microsystem. X0dx0a Double-click to run the installation Ghost system on the desktop and follow the prompts of the program.