Casino Plus login register

List of the catalog of this article:

• 1,Casino Plus login register< A href='#How to release the car's anti-theft lock is activated' title='How to release the car's anti-theft lock is activated'>How to remove the car anti-theft lock when it is activated
• 2, Baojun 730 engine anti-theft unlock
• 3, How to unlock the engine lock?
<

How to release the car's anti-theft lock is activated

1. [Pacific Automobile Network] Unlocking method of the car anti-theft lock: disconnect the negative pole of the battery for a period of time and wait for the protection data of the engine to be emptied. Reconnect, generally cut off the power for about 10 seconds; call the trailer and go to the designated 4S store to solve the anti-theft lock.

2. If the car has an anti-theft password, you can press the XODE button of the car, enter the password, and then press the RESET key to unlock it. If there is no anti-theft password, do not press any button, turn the key to the on position and do not start the engine. When 0000 appears on the screen, it means that the anti-theft system of the car has been released.

3, release it through the remote control key of the motor vehicle. Press the unlock button on the remote control key, and the anti-theft system of the vehicle will be released. Otherwise, if you force the door of the motor vehicle, the vehicle will sound the alarm, and the double flashing lights of the vehicle will flash.

4. If it can be started, it means that the problem has been solved. If it can't be started, you need to contact the brand authorized dealer for rescue.

5. The method of turning off the anti-theft lock of the Jetta car is as follows: open the engine hood of the Jetta car, find the central wire of the anti-theft device, and unplug the power input cord. Press the mute button on the remote control, and the anti-theft system will start silently; press the sound button, and the system will make a sound, indicating that the anti-theft system has been activated.

Baojun 730 Engine anti-theft unlocking

1. Start the vehicle first, and then press and hold the driver's door unlock button for 10 seconds, and the engine anti-theft will be unlocked. For vehicles equipped with engine anti-theft, even if the thief can open the door, it can't drive.

2. Baojun 730 engine anti-theft unlocking needs to hold down the unlock button of Baojun 730 for about 10 seconds. The specific operation steps to correctly operate Baojun 730 to remove engine anti-theft are as follows: open the door on this side of the cab of Baojun 730. Step on the brake pedal of Baojun 730.

3. Baojun 730 anti-theft release: the remote control is locked, click the remote control to start the construction; if the remote control is lost, the remote control is re-equipped; if the chip anti-theft engine is anti-theft, the key can only be re-equipped.It is estimated that the vehicle is equipped with an electronic engine anti-theft system, commonly known as chip anti-theft.

How to unlock the engine lock?

There are two ways: first, open the engine compartment of the vehicle, disconnect the positive and negative poles of the battery for about ten minutes, and turn on the battery again, which will unlock the engine lock.Contact the four s store of the vehicle brand and use the decoder of the detection computer to unlock the engine.

There are two ways: 1. First, open the engine compartment of the vehicle and disconnect the positive and negative poles of the battery. For about 10 minutes, open the battery again and unlock the engine lock. Contact the vehicle brand 4s store and use the decoder of the detection computer to unlock the engine.

Check your remote unlocker. If the battery runs out, please replace it with a new battery. If you have any doubts about the password, you can contact the Fox Auto Service Center, and they can help. Check the installation status of the anti-theft lock and check whether it is installed correctly.

Use the key: If your vehicle is equipped with an engine anti-theft lock with a key, you can use the key to unlock it. When using the key, you need to make sure that the key matches the anti-theft system.If the key does not match, the anti-theft system will not be able to unlock it.

First, step on the brake pedal of the vehicle, turn on the ignition switch to turn on the vehicle, click the RES button on the left side of the steering wheel, and then press the OK button of the multi-function button on the right side of the steering wheel for a long time. After hearing the ticking sound, release your hand, adjust the vehicle gear to D gear, and the engine anti-theft lock will be released, and the vehicle can be started normally. .