bingo plus update today

bookList of article catalogs:

• 1, What is the reason for the high temperature of the all-firewood 485 engine?
• 2、Full wood 48 How about 5
• 3,bingo plus update today What's the difference between Quanchai 4D22E and 485
4, Light truck's What is the horsepower of the 485 engine
• 5, 485 diesel engine how many horsepower

What is the reason for the high temperature of the all-firewood 485 engine?

1, 7 The coolant leaks, causing the engine temperature to rise. The faults are mostly seen in radiators, pumps, cylinder blocks, cylinder heads, cylinder pads, fan heater radiators, water pipes, rubber hoses and water outlet switches.

2. High quality, high manufacturing and maintenance costs, loud noise, difficult to start, etc. Moreover, diesel vehicles often drive on the highway, and the vehicles run for a long time.The engine temperature and pressure are relatively high, and more soot and carbon are produced in the cylinder. The engine oil is also easy to oxidize and produce glue, so the diesel oil is required to have good high temperature and purity.

3. The main reasons for the high water temperature of the truck are: lack of coolant or improper selection, insufficient heat dissipation area, failure of thermoster, failure of cooling fan, failure of circulating water pump, and too short engine injection time.

4. Check the coolant. The most common reason for the high operating temperature of the diesel engine is the lack of coolant. When the diesel engine is working, it will produce a large amount of underutilized heat and gather on the engine parts.

5. There are several reasons for the high water temperature of the engine: I. The cooling fan doesn't turn. The cooling fan may be controlled by the temperature control switch;It may also be controlled by the water temperature sensor. II. Insufficient cooling medium. 1 Antifreeze: High-end cars are required to add antifreeze all year round; 2 Water or distilled water: temporary use; 3 The water tank cover is leaking.

How about full wood 485

Full wood 485 gasoline engine has undergone strict quality control, and its reliability is higher. It can run for a long time under high load conditions and has a long replacement cycle, which can effectively reduce maintenance costs, and can also To ensure the high reliability of the engine.

The Xinchai 485 engine is not bad, but I still recommend the 490 engine in the cloud compared with the same engine. If you add 3 tons of goods, Xinchai 485 is not bad. Don't consider more than 3 tons, because the fuel consumption has increased sharply, 3 tonsAbove, about 5 tons, it is recommended to be in the cloud. The engine of the plateau engine is relatively quiet and fuel-efficient.

Personally, I think Chang Chai is better. Now Weichai Yangzijiang 485 is a new model. The green body is also a different quality. It is better to choose whole wood, which is of excellent quality. Changchai's single-cylinder diesel engine is a very good diesel engine in China.

The common disease of the parameters of Quanchai 485 engine. THE SPEED IS LOWER THAN THAT OF THE GASOLINE ENGINE (THE GENERAL SPEED IS 1800-3000R/MIN), THE QUALITY IS LARGE, THE MANUFACTURING AND MAINTENANCE COSTS ARE HIGH, THE NOISE IS HIGH, THE START-UP IS DIFFICULT, ETC.

The two engines belong to the same series of products, but the emission standards followed are different. 4D22E is the European III standard, and 4D22F is the national III standard.

d22 (4-cylinder diesel engine, displacement 2 liters) is equivalent to 490. It is smaller compared with 485.

D22E is a four-cylinder engine produced by Anhui Quanchai Power Co., Ltd., with a cylinder diameter of 85, that is, 485.The engine adopts the BOSCH common rail fuel system. Direct injection, supercharged medium cooling, EGR, high-pressure common rail, small hole fuel injector. The warranty mileage is 200,000 kilometers. The power is 65KW, that is, 88 horsepower.

D22E is a four-cylinder engine produced by Anhui Quanchai Power Co., Ltd., with a cylinder diameter of 85, that is, 485. The engine adopts the BOSCH common rail fuel system. Direct injection, supercharged medium cooling, EGR, high-pressure common rail, small hole fuel injector. The warranty mileage is 200,000 kilometers. The power is 65KW, that is, 88 horsepower.

What is the horsepower of the 485 engine of a light truck

The engine is a diesel engine, usually about 45 horsepower. Horsepower can be converted into a success rate.Power is one of the most important performance parameters of the engine, which indicates the work that the engine can do in a unit of time. The higher the power, the more work the engine can do in a unit of time. Therefore, power is an important parameter to compare engine performance.

horsepower. According to the query Pacific Automobile Network, the 485 engine is a kind of diesel engine, and the common 485 engine has a horsepower of 45 horsepower.

The engine is a kind of diesel engine, and the common 485 engine has a horsepower of about 45 horsepower. Horsepower is a commonly used unit of measuring power in engineering technology. Proposed by James Watt. 1 horsepower is about 735 watts. It generally refers to meteric horsepower rather than emedic horsepower.

The engine is a kind of diesel engine, and the 485 engine horsepower is often around 45 horsepower.Horsepower can be converted into a success rate. Power is a crucial main performance parameter of an engine. Power represents how much work an object does per unit of time.

Engine is a kind of diesel engine, and the common 485 engine has a horsepower of about 45 horsepower. Horsepower can be converted into a success rate. Power is an important performance parameter of the engine. Power indicates how much work an object does in a unit of time. The greater the power, the more work can be done per unit time.

The more common 485 automobile engine horsepower is around 45 horsepower; horsepower can convert the transmittance, and the output power is a key technical parameter of the automobile engine; the output power indicates how much work 1 item does per unit time. The greater the output power, the more work per unit time. A lot.

How much horsepower is a 485 diesel engine

1. Overview of diesel engine: 485 engine is a common diesel engine with a horsepower of about 45 horsepower. Horsepower can be converted into a success rate. Power is an important performance parameter of the engine. Power indicates how much work an object does in a unit time. The greater the power, the more work per unit time.

2. The diesel engine is equivalent to a diesel engine with 4 cylinders and a diameter of 58. The ordinary machine only has 52 horsepower without supercharging. Horsepower is a unit of measurement of power commonly used in engineering technology. The history of diesel engines Dissel, a French-born German engineer, successfully developed a practical four-stroke diesel engine in 1897.

3. The engine is a kind of diesel engine, and the common 485 engine has a horsepower of about 45 horsepower.Horsepower is a commonly used unit of measuring power in engineering technology. Proposed by James Watt. 1 horsepower is about 735 watts. It generally refers to meteric horsepower rather than emedic horsepower.